Haibike OEM Side Prop Stand

In Stock
  • Contact Us

This is the factory original eBike Side Stand for Haibike electric bikes, (Excluding 2021 Haibike All-MTN Models) (Fits many other bikes with 18mm bolt spacing). Bolts sold seperatley, (Click Here).

This stand bolts directly to Full Suspension Haibike frames (remove plastic blanking plate first) and requires two 30mm M6 bolts and Nyloc nuts (Sold Here).

Hardtail Haibike frames (no rear suspension) require a separate Adaptor Mount (Sold Here) and two 25mm M6 bolts (Sold Here)

For fitting instructions see images below.

Customers Also Bought

This is the factory original Haibike Gen2 plastic cable guide inlets that sit into the frame on all Haibike SDuro -XDuro electric bikes for internal frame...
In Stock

The Haibike OEM kickstand Adaptor Mount for all Haibike xDuro & sDuro Hardtail eMTB's (No rear suspension). (Requires bolts. Sold separately, Click...

Also Fits Haibike Flyon Bikes This is the factory original Haibike Gen2 rear mech hanger, joining the rear mech to the frame. For all Haibike xDuro Full...

Haibike - The Crank - OEM Replacement for 2020+ Haibikes, however will fit any other square taper or Isis spline. If you're current cranks use the OEM...
check size for availability
In Stock

M-Part Commute mirror internal bar-end clamp

Nuts & Bolts 30mm for direct mounting (Full Suspension) 2 x M6 Bolts with Nyloc Nuts
In Stock

2 x M6 25mm Bolts to mount to prop stand adaptor (For hardtail)
In Stock

Wet Weather Lube A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in wet and harsh conditions. Formulated...

Haibike FLYON OEM Side Prop Stand Mount fits all Flyon models. All FLYON Models, HardSeven 9 & 10, HardNine 9 & 10, Trekking 9 & 10. Works with...

Haibike Intube Frame Charge Port Cover for 2020+ Haibikes with an intube Battery.
In Stock

This is the original replacement headset for all Haibike Flyon bikes.
In Stock

THE HAIBIKE TWIN TAIL LIGHTS With the Haibike Twin Tail Lights you can keep on riding even after the sun sets! Eight highly-efficient LEDs make the eBike...

This is the original rack/carrier that fits directly to your Flyon via the mounts on the seat stays as shown in the second picture.

This is the O.E.M replacement lower battery cover for all Flyon models. Multiple Colours Available to order

Includes Countersunk bolts to bolt to frame. Fitment; HardSeven 4 – 8, HardNine 4 – 8, Trekking 4 – 8

Mount your MH-COVER on the display quickly - that's it. 100% fitting Perfect protection during transport and maintenance No protection cover removal...
In Stock

XLC MRS multimount MR-S10 The XLC MRS Multimount MR-S10 is a handy little adapter for your bike for mounting various accessories. These could include...
cs-cart add-ons, cs-cart licences, cs-cart developing